StrongBond
STRONGBOND UPVC adhesive is an industrial grade, clear low VOC emission, medium bodied, fast setting, high strength UPVC solvent adhesive for all classes and schedules of pipe and fittings. Can be used without primer on non-pressure systems if local codes permit.
| Sr No. | Requirements | Observed Value |
|---|---|---|
| 1 | Colour | Transparent |
| 2 | Odour | Medium |
| 3 | Pot Life | 15 Minutes |
| 4 | Curing Time | 20 Minutes |
| 5 | Pipe Joining Time | 1.30 Minutes |
| 6 | Density | 0.8933 gm/cm2 |
| 7 | Resin Content | 8% |
| 8 | Viscsity in mPa.s | 200 mPa.s (290c) |
| 9 | Lap Shear Strength | 1.00 Mpa (Ater 2 hrs) |
| 10 | Hydrostatic burst strength | 3.00 Mpa (After 2 hrs) |
Applications
STRONGBOND UPVC Adhesive is for use on all types of UPVC plastic pipe applications. It is suitable for use with potable water pressure systems, irrigation, turf, foam core, conduit, and sewer, drain, waste and vent systems.
Shelf Life
STRONGBOND UPVC Adhesive :- 1 years. Adhesive must be stored in tightly sealed containers. The date code of manufacture is stamped on the bottom of the container. Stability of the product is limited by the evaporation of the solvent when the container is opened.
Packing
Tube Packing: 10ml, 20 ml
Metal Container: 50 ml, 100 ml, 250 ml, 500 ml,1000 ml
Handling precautions
Strongbond UPvc Adhesive must never be used in UPVC piping systems using or being tested by compressed air or gases; including air-over-water booster. Do not use in conjunction with flue gas ventilation systems.
Reviews
There are no reviews yet.